Whenever your Rikomagic MK802II has following issues, you might solve these issues by using this recovery/update method.
1. After boot, there is no signal;
2. There is only boot screen;
3. System running very slow or/and crashing;
4. Can�t find the wireless network equipment or can�t connect to wireless network;
5. When installing apps, player loss power unexpected and cant boot up.
Recovery / update steps:
1. Download from here the firmware .img file and the Livesuit recovery tool.
2. Decompress the archive and the run the LiveSuit.exe file.
When the first pop-up window appear, select the 'No' option and then go to the next step, and click �img� to choose tvd_minipc_4.0_0815_ddr408_otd_recovery_....img file for update or recovery.
3. Connet the MK802II to the computer. In this step you'll need 1 piece of thin metal stick. Then you have to remove the bottom cover of MK802II, as below, Take out the USB cable (Micro USB to USB A cable), connect with USB OTG of the unit, then according to below indication, put the thin metal stick between 6th and 7th pin of the flash.
Don�t release the stick yet, and at same time, connect the USB cable with computer, after 3-5s, loose the stick. There will pop out a window guide to install new HW driver, please install according to below step one by one: (this process should execute twice.)
Then select 'Next'. Download the USB driver from here.
Unrar the file and then click 'Browse' button, find out from extracted folder, then click �next� to install.
When finished installation, the computer will pop out below window, then click �finish�.
This process should execute twice, after finished, below screen will appear (format confirm window):
Select �yes� again, then recovery/update process will execute.
This procedure will cost 3 minutes so please wait patiently and during recovery/upgrade do not remove the usb cable. When the prompt window appears, click �confirm� for confirmation, then pull out the USB cable and then the whole process will be finished.
Notice:
1. Same computer just need install driver for one time;
2. First turn on the unit after recovery/update will cost more long time, and even occur some lag issue, it�s normal since internal apk file need be decompressed and occupy RAM, after 5 minutes, then system running well. So don�t worry about that.
P.S.: Use this tutorial at your own risk, I'm not responsible for any incorrect use of it or any damage caused to your device.
via http://touchscreen-apps.blogspot.ro
0 comments:
Post a Comment